EHS Expert Appliance Repair
Gas Appliance Repair · Greater Seattle

Gas Appliance
& Cooktop Repair

Safe, efficient repair for gas stoves, ovens, cooktops, and dryers — certified technicians, factory-approved parts, full warranty.

What we see most

Most Common Gas Appliance Issues

Gas appliances are reliable when serviced correctly — and dangerous when ignored. Here's what we diagnose most often.

Burner Won't IgniteGas Smell or Suspected LeakYellow or Uneven FlameOven Won't Heat or Holds Wrong TempGas Dryer Not Heating

Issue 01 of 05

Burner Won't Ignite

Spotted your issue?

Get a same-day diagnosis from a certified tech.

Schedule Repair

Clicking with no flame, a weak spark, or no response at all. The cause is usually one of:

  • A clogged burner cap, port, or igniter
  • A weak or cracked spark electrode
  • A faulty igniter switch on the control knob
  • Low gas pressure or a partially closed shutoff valve

Any gas odor is a serious safety issue. Don't troubleshoot — act:

  • Shut off the gas at the appliance valve
  • Open windows and leave the area
  • Do not switch lights or appliances on or off
  • Call a certified gas tech (and 911 if the smell is strong)

A clean gas flame should burn blue. Yellow, orange, or flickering flames mean improper air/gas mix — usually a clogged burner port, dirty orifice, or air shutter out of adjustment. Yellow flame produces carbon monoxide, so it's worth fixing fast.

A failing safety valve, weak igniter, or out-of-calibration thermostat keeps a gas oven from reaching or holding temperature. The igniter is the most common failure — when it gets weak, the safety valve never opens to let gas through.

A gas dryer that tumbles but doesn't heat usually has a failed igniter, a blown thermal fuse, or a stuck gas coil. A blocked dryer vent is a frequent root cause — and a serious fire hazard.

Why it matters

Why Gas Appliances Demand Expert Service

Gas gives you precise control and lower running costs — but it has zero tolerance for shortcuts.

Safety First

Gas leaks, CO buildup, and improper installs are real risks. Certified service eliminates them.

Efficient Operation

Properly tuned burners use less gas and heat faster. A small issue quietly inflates your gas bill.

Precise Cooking

Clean, blue flames give you the instant control gas cooking is loved for — yellow or weak flames don't.

Before you call

Quick checks —
and when to stop.

A few simple things are safe to check. Anything beyond cleaning is a job for a certified gas tech.

Safety first

Smell gas? Stop everything. Shut off the appliance gas valve, open windows, leave the home, and call from outside. Never relight, switch lights, or use your phone in the room.

Still not working? Schedule repair
  1. 01

    Clean the Burner Ports

    Food spills clog burner caps and ignition ports. Wipe them clean, dry them fully, and reseat the cap flush.

  2. 02

    Check the Flame Color

    Flames should be steady and blue. Yellow or orange = call us — it usually needs orifice cleaning or air-shutter adjustment.

  3. 03

    Verify Power (Gas Range/Dryer)

    Gas appliances still need 120V for ignition and controls. Confirm the unit is plugged in and the breaker hasn't tripped.

  4. 04

    Don't DIY Gas Components

    Gas valves, regulators, igniters, and connections are not DIY territory. Stop here and book a certified tech.

Certified technician performing Why Certified Gas Service Is Non-Negotiable
Done right

Why Certified Gas Service Is Non-Negotiable

Gas appliances combine open flame, combustible fuel, and tightly tuned safety valves. A wrong part or a missed step doesn't just degrade performance — it can become a leak, a fire, or a carbon-monoxide hazard.

Our certified gas technicians diagnose with proper test equipment, use factory-approved parts, and verify safe operation before they leave. Every repair is backed by a warranty on both parts and labor.

We also handle proper installation of new gas units — leveling, leak-checking, and verifying combustion — so your appliance starts life safe and efficient.

Why EHS

Why Choose Expert Appliance Repair for Gas

Specialists in gas ovens, stoves, ranges, cooktops, and dryers — for every major manufacturer.

Certified Gas Technicians

Authorized to service every type of gas appliance, with safety as the default.

Safety-First Process

Leak checks, combustion verification, and proper venting on every repair.

Same & Next-Day Service

Fast scheduling that minimizes downtime — and removes the risk faster.

All Major Brands

Wolf, Viking, Bluestar, Dacor, Bertazzoni, Whirlpool, KitchenAid, Samsung, LG and more.

Full Warranty

Comprehensive coverage on parts and labor — in writing.

Factory-Approved Parts

Original components only — never a substitute that compromises safety.

Real customers · Real repairs

Happy Homes Across Greater Seattle

A few of the smiles we've earned on the job — and what our customers had to say afterwards.

5.0
Refrigerator Repair completed by EHS Expert Appliance Repair in Bellevue, WA
Verified Repair

Refrigerator Repair

Bellevue, WA

5.0
Washer Service completed by EHS Expert Appliance Repair in Seattle, WA
Verified Repair

Washer Service

Seattle, WA

5.0
Freezer Fix completed by EHS Expert Appliance Repair in Redmond, WA
Verified Repair

Freezer Fix

Redmond, WA

Swipe through repairs

What They're Saying

Get in touch

Schedule Repair Now!

We accept online service requests 24/7. After-hours requests are handled the next morning.

Call now

Licensed & Insured

Trusted, certified technicians.

Parts and Labor Warranty

Backed on every repair.

Open now · Monday–Friday, 8:00 AM – 6:00 PM

Contact Us

We'll get back within the hour during business hours.

We respond within 24 hours.

Facebook 5-star rating for EHS Expert Appliance RepairGoogle 5-star rating for EHS Expert Appliance Repair